Local Computer Repair Service

There are situations in life when you accidentally spill your favorite sweet or strong coffee lemonade on your expensive laptop and this is where panic starts, what to do?here are the first thoughts that crawl into your head.Next, describe your actions that you were always ready for such situations and get out of them with minimal losses so we go.

1.Act quickly
I understand that you can not be completely sober or boisterous company does not give you focus and yet as quickly as possible off a computer keyboard ustroystvo.Esli then pull the cable from your computer if it is then immediately pull out the laptop battery, same thing with mobile phone . Remember the golden rule of all liquids conduct electricity poeetomu in order to avoid short circuits, disconnect it immediately.Since the liquid slowly spreads inside your affected devices have a chance that she did not have time to short the major sub-assemblies.So that the speed and the speed again.

2.Assess the damage
Now when you turn off the device to visually assess the size of the strait, if it is not large droplets lying peacefully on the keyboard then take a wet alcohol wipes and wipe lightly, let dry.
If large enough that the strait will have to resort to demolition.Please note if you are not when it did or did not know exactly how to do it better, contact sales obsluzhivanie.Esli not afraid to feel free to take a small screwdriver in hand and begin to shoot accurately keys. Remember to take pictures of the keyboard that would not then think where which button was.

Next, wet wipes wipe thoroughly enough space filling, do not forget that all liquids other than water unless they are washed thoroughly and then they will become sticky.This may influence later on zaedenii keys.
3.Cleaning of printed circuit boards
If all went strait to the same printed circuit boards that are indiscriminately you can not do.
Carefully unscrew all the screws from the housing, put them all in size in different places, it is well suited for packaging of yaits.Sdelayte photos before razborkoy.Otkrutite screws from the PCB will have to remember that to make an effort and in order not to damage the fragile PCB select the appropriate screwdriver screws.Now, using cotton swabs and alcohol to gently wipe board.

If the pollution Nuu great there is another option disconnect all cables from the board and put it in a container with warm soapy water, wait until the spots themselves are not cleared about an hour, 2-3 and then just pull the board and allow to dry.This is best done using a hair dryer cold vozduhom.Posle that as sure that all parts are dry perfectly possible to start sborke.Zakrutite all the screws on the place, connect all the wires and safely turn on your device.
I’d add that I wish you no matter where my article to you in my life have come in handy and has served as a reference.